PacketLossTest

Wi-Fi Network Test · Wireless Stability

Wi-Fi Network Test

Test your wireless connection's speed, ping, jitter and packet loss — the clearest signals of Wi-Fi interference or a weak signal.

No registration required · Measures Wi-Fi speed, packet loss, jitter and ping

Why Test Wi-Fi Specifically?

Wi-Fi introduces failure modes a wired connection simply doesn't have: physical distance from the router, walls and floors attenuating the signal, interference from neighboring networks and household electronics (microwaves and cordless phones on 2.4GHz are classic culprits), and contention from every other device sharing the same wireless channel at once.

Those problems show up most clearly as packet loss and jitter, not necessarily as a low bandwidth number. A laptop sitting right next to the router might show excellent speed, while the same laptop two rooms away shows a similar download number but far higher packet loss and jitter — that gap is the Wi-Fi signal degrading, not your internet plan.

Run this test close to the router and then from the spot where your connection usually feels bad. Comparing packet loss and jitter between the two locations — more than comparing raw speed — is usually the fastest way to confirm whether Wi-Fi itself is the problem.

Reading the Numbers

RangeWhat it means
Loss under 0.5%, jitter under 10msStrong signal — Wi-Fi is not your bottleneck Excellent
Loss 0.5–1.5%, jitter 10–20msUsable but imperfect — some interference likely Good
Loss 1.5–3%, jitter 20–40msWeak — calls and games will show clear artifacts Fair
Loss 3%+ or jitter 40ms+Poor signal — move closer to the router or change channel/band Poor

All Network Testing Tools

Everything you need to diagnose your connection — packet loss, speed, ping, jitter, latency and more. Each test runs in your browser, no install required.

📉

Packet Loss Test

Free packet loss test.

⚡

Internet Speed Test

Free internet speed test.

📡

Ping Test

Free online ping test.

〰️

Jitter Test

Free online jitter test.

⏱️

Latency Test

Free latency test.

🏅

Network Quality Test

Free network quality test.

⬇️

Download Speed Test

Free download speed test.

⬆️

Upload Speed Test

Free upload speed test.

🎮

Gaming Network Test

Free gaming network test.

You are here📶

Wi-Fi Network Test

Free Wi-Fi network test.

📞

VoIP / Video Call Test

Free VoIP and video call network test.

📊

Connection Stability Test

Free connection stability test.

🔬

Network Performance Analyzer

Free network performance analyzer.

Recent Tests HistorySaved on this device only

    No tests saved yet.

    How Does a Wi-Fi Network Test Work?

    1. 1
      We connect you to a test server.

      The closest suitable server is chosen automatically.

    2. 2
      We measure ping, jitter and packet loss.

      These three respond quickly to Wi-Fi signal quality, so they're the clearest indicator of wireless interference or distance from the router.

    3. 3
      We download test data.

      Your browser receives real data using parallel connections.

    4. 4
      We upload test data.

      Your browser sends data and we time the transfer.

    5. 5
      We analyze and display.

      Everything is combined into a simple quality and stability estimate.

    Frequently Asked Questions

    How do I know if Wi-Fi is causing my connection problems?

    Compare results from right next to the router against results from your usual spot. If packet loss and jitter rise sharply further from the router while a wired connection at the same location stays clean, Wi-Fi signal quality — not your internet plan — is the bottleneck.

    Does 5GHz or 2.4GHz Wi-Fi perform better?

    5GHz offers higher speed and less interference (fewer household devices use it) but has shorter range and penetrates walls less well. 2.4GHz reaches further and through more obstacles but is more crowded and prone to interference. Try both and compare packet loss and jitter, not just speed.

    Can other devices on my Wi-Fi cause packet loss?

    Yes. Wi-Fi is a shared medium — every device on the same channel competes for airtime, and a busy network (multiple streams, downloads, smart-home devices) increases contention, which shows up as higher jitter and packet loss, especially on older routers.

    Why does my Wi-Fi speed test look fine but calls still cut out?

    Speed tests transfer a lot of data and average it out, which can mask brief packet loss or jitter spikes. Live calls are sensitive to exactly those brief spikes, so a good speed number doesn't rule out intermittent Wi-Fi problems — check the packet loss and jitter figures specifically.

    What's the easiest fix for a weak Wi-Fi signal?

    Move closer to the router or move the router to a more central, elevated location; switch to the 5GHz band if range isn't an issue; change your Wi-Fi channel to avoid overlap with neighboring networks; or add a mesh access point to cover a dead zone.

    Language

    Choose your preferred language. Your choice is saved on this device.

    Settings

    Appearance